FM 10W Wireless Coupling Fiber Optical 12 Channels Selective Repeater
1.Main Features
1. Superior RF performance, high efficiency
2. High Gain and low Noise Figure
3. Operating frequency can be customized
4. Advanced ALC and PLL technology, high stability and reliability
5. Easy installation, operation and maintenance
6. Flexible to any environment and low cost
2. Specifications
Items | Parameters |
Frequency Range | 87MHz~108MHz |
Number of Channels | 12 |
Bandwidth of Channel | 100kHz |
Output Power(Max) | 40±2.0dBm |
Max Gain | 95±3dB |
Gain Modulation Range | 30dB |
Gain Modulation Step | 1dB |
Gain Modulation Error | While gain is 0-20dB,Error≤1dB;While gain is 21-30dB,Error≤1.5dB |
Noise Factor | ≤5dB |
Max NO Damage Input Power | -10dBm |
Automatic Level Control(ALC) | Output power variation < 2dB or be off when adding 10dB at max output power. Control range≥30dB. |
Pass Band Ripple | ≤3dB |
VSWR | ≤1.5 |
Time Delay | ≤18.0μs |
Spurious Emissions | In-Band | ≤-36dBm/3kHz or ≤-60dBc/3kHz |
Out-Band(Deviation from the band edge outside 2.5MHz) | 9kHz~1GHz:≤-36dBm |
1GHz~12.75GHz:≤-30dBm |
IMD | In-Band | ≤-45dBc/30kHz |
Out-Band(Deviation from the band edge outside 2.5MHz) | 9kHz~1GHz:≤-36dBm |
1GHz~12.75GHz:≤-30dBm |
Out of Band Rejection | ≤-30dBc@±400kHz ≤-40dBc@±600kHz ≤-45dBc@±1MHz ≤-55dBc@±5MHz |
Frequency Stability | ≤0.05ppm |
Local Monitoring & Control | Local :RS232 |
RF Connection Mode | N/F,50Ω |
Type of Fiber Optical Cable | Single Mode |
Fiber Optical Interface | FC/APC |
Fiber Optical Loss | Max 8dBo |
Optical Wavelength | 1310nm/1550nm |
Optical receiving sensitivity | -15dBm |
Number of Slave Units | 4 Slave Units per 1 Master Unit |
Power Supply Mode | Master Unit /Slave Unit: AC 220V±20%,45~55Hz |
Power Consumption | Master Unit: ≤80W Slave Unit: ≤130W |
Operation Temperature | -25℃ ~ +55℃ |
Casing class | Master Unit: IP55 Slave Unit: IP55 |
Machine Weight | Master Unit: ≤20kg Slave Unit: ≤20kg |
Dimension | Master Unit: 357mm×160mm×453mm (W*H*L) Slave Unit: 357mm×160mm×453mm (W*H*L) |
MTBF | ≥50000h |
3. Machine Drawing
Fig2-1 Machine Drawing for Master/Slave Unit